Skip to main content
此頁面使用自動翻譯顯示。 是否要改為用英語檢視？
Simcenter

產品索引

為您的工程師提供最佳的預測模擬和測試應用解決方案組合之一。Simcenter 結合了豐富的工具套件與深厚的工程專業知識和專門的支持。使用 Simcenter 進行創新工程：更快地提供更好的產品。

Simcenter X

透過 Simcenter X 加速創新 — 靈活、雲端支援的多網域模擬。

探索 Simcenter X
探索「Simcenter」

機械與製造模擬產品

Simcenter 提供預測產品的機械和零件製造性能所需的工具。瀏覽完整的 Simcenter 機械與製造模擬工具系列。

A 3D digital model of a car's internal structure, color-coded to show stress or performance analysis results.
Structural simulation

Simcenter Optistruct

Industry‑proven structural solver for linear and nonlinear analysis under static and dynamic loads, leading the market in design and optimization
CFD simulation of a vehicle component made with the Simcenter Nastran software.
Mechanical and manufacturing simulation

Simcenter Nastran software

Accurately simulate products for structural strength, vibration and acoustics. Simcenter Nastran is a premier solver for performance, accuracy and scalability.
A 3D simulation of a yellow car after a front-end collision with a wall, showing deployed airbags and crumpled front.
Mechanical and manufacturing simulation

Simcenter Radioss

Optimize product performance under dynamic loads with a leading structural solver for highly nonlinear problems like crash, impact, blast and stamping.
Mechanical and manufacturing simulation

Simcenter Inspire

Inspire is a unified simulation-driven design platform for generating, optimizing and manufacturing innovative parts in one environment, enhanced with GPU rendering
Structural simulation

Simcenter Multiscale Designer

Merges the modeling, simulation, uncertainty quantification, and optimization of composite material-based structures at multiple spatial and temporal scales
Aircraft wing with colorful airflow simulation overlay
Structural simulation

Simcenter Zona

Simulate aircraft structure aeroelasticity with industry-proven solvers. A critical part of the digital thread, from concept studies to structural certification.
A 3D digital simulation of an aerospace component, showing color-coded analysis results within Simcenter HyperLife.
Mechanism simulation

Simcenter Motionsolve

Comprehensive multibody simulation software to easily build and run complex system models, evaluate dynamic behavior and optimize product performance.
Visual of a 3D model created with the Simcenter 3D software.

Simcenter 3D software

Address complex engineering challenges by enhancing simulation efficiency. Simcenter 3D is one of the most comprehensive, fully-integrated CAE solutions.
CFD simulation of two people in a car with the Simcenter Madymo Software.
Crash and safety simulation

Simcenter Madymo software

Reduce new or improved vehicle development time and cost through early analysis and optimization of occupant and pedestrian safety.
Graphical performance representation of a vehicle's directional stability made with the Simcenter Tire software.
Mechanism simulation

Simcenter Tire software

Apply accurate tire modeling for vehicle performance simulation. Simcenter Tire helps you apply tire models to applications like vehicle handling and durability.
With SimSolid, eliminate geometry simplification and meshing, the two most time-consuming tasks performed in traditional FEA.
Structural simulation

Simcenter Simsolid

Analyze fully-featured CAD assemblies in minutes by eliminating the need to simplify geometry and meshing.
Person working on a computer with hyperlife on the screen
Mechanical and manufacturing simulation

Simcenter Hyperlife

An easy‑to‑learn, comprehensive fatigue and durability solution built on a solver‑neutral framework, compatible with all major FEA result files.
Engineer uses Simcenter S-Frame for 3D structural analysis and design of a building model.
Structural analysis for AEC

Simcenter S-Frame

Use Simcenter S‑Frame to analyze and design structures of any complexity, material, load case, nonlinear behavior and code requirement
Curved glass skyscrapers reflecting a bright blue sky, showcasing modern architecture and urban design from a unique perspective.
Structural analysis for AEC

Simcenter S-Frame Steel

Use Simcenter S-Frame Steel to design and optimize steel structures. Code-check and auto design for both strength and serviceability to multiple design codes.
Panoramic view of a city at sunset, with residential buildings and two tall skyscrapers under construction against a gradient sky.
Structural analysis for AEC

Simcenter S-Frame Concrete

Use Simcenter S-Concrete to design, detail and optimize reinforced concrete walls, concrete beams, concrete columns, continuous beams and more.
Close-up of a circular rebar cage for concrete construction, showing intricate metalwork and structural strength.
Structural analysis for AEC

Simcenter S-Frame Foundation

Structural design software for deep and shallow foundation analysis and design, supporting civil, structural and geotechnical engineers.

探索流體和散熱產品

探索您如何利用差價合約和計算化學，進行無限範圍的應用，包括外部空氣動力學、多相和反應流、電子散熱、材料屬性預測等。

Heat image of a battery case using Simcenter battery design studio
Fluids and thermal

Simcenter Battery Design Studio software

Design better battery cell packs leveraging detailed geometrical cell specifications and cell performance simulation.
A design schematic created through Simcenter FLOEFD.
Fluids and thermal

Simcenter FLOEFD software

Leverage fully CAD-embedded CFD software for designers to shorten development by evaluating fluid flow and heat transfer earlier in NX, Solid Edge, CATIA and Creo.
Computer-generated 3D model of electronic components on a circuit board with heat distribution visualization
Fluids and thermal

Simcenter Flotherm software

Improve electronics thermal management for reliability with fast, accurate electronics cooling CFD simulation from initial pre-CAD exploration to final verification.
Simcenter Culgi simulating pharmaceutical and cosmetic materials
Fluids and thermal

Simcenter Culgi software

Engineer novel materials with the desired properties along the complete lifecycle using multiscale computational chemistry simulations.
Illustration of a man and a woman using laptops representing Simcenter X.
Simcenter

Simcenter X

Accelerate innovation with Simcenter X - flexible, cloud-powered multi-domain simulation.
Simcenter STAR-CCM+ mock-up of two racing buggies.
Fluids and thermal

Simcenter STAR-CCM+ software

Improve product performance with multiphysics computational fluid dynamics (CFD) software for real-world conditions.
Fluids and thermal

Simcenter Ultrafluid

Achieve high-fidelity aerodynamics and aeroacoustics predictions using a low-diffusive Lattice Boltzmann implementation combined with advanced wall models.
Fluids and thermal

Simcenter EDEM

DEM software for bulk/granular material simulation. Accurately simulates and analyzes the behavior of coal, ores, soils, fibers, grains, tablets, powders, etc.
Fluids and thermal

Simcenter Flightstream

Accelerate aerodynamics and hydrodynamics analysis with Simcenter Flightstream, a fast panel method simulation software to resolve key flow features efficiently.

探索系統模擬產品

使用 Simcenter 系統模擬解決方案，您可以從早期開發階段評估和平衡性能屬性。探索我們的完整產品組合。

Visual of Simcenter Amesim system simulation software.
Systems simulation

Simcenter Amesim software

Simcenter Amesim is a mechatronic systems simulation platform that allows design engineers to virtually assess and optimize the systems’ performance.
Dashboard of thermo-fluid system simulation using Simcenter Flomaster
Systems simulation

Simcenter Flomaster software

Simcenter Flomaster offers a comprehensive simulation toolset for designing, commissioning and operating thermo-fluid systems.
Multi-attribute analysis results from the Simcenter System Analyst software.
Systems simulation

Simcenter System Analyst software

Simcenter System Analyst is a company-wide collaborative tool designed to configure, share, trace system variants, and also simulate and optimize their performance.
Systems simulation

Simcenter Flow Simulator

A 3D design tool that provides interdisciplinary modeling and optimization for fluid and thermal systems within a CAD-integrated environment.
A product screenshot of Simcenter Twin Activate, showing multi-domain system modeling.
Systems simulation

Simcenter Twin Activate

An open, flexible integration solution that enables whole system simulation with real-time digital twin deployment through any product life cycle stage.
Systems simulation

Simcenter Compose

A numerical computing environment in which it’s easy to develop and perform custom mathematical data operations, including CAE pre/post-processing data.
A computer screen displays a complex block diagram from a simulation or control system design software, featuring various interconnected blocks like "Pre-Scaling" and "Low-Pass Filter" with numerical inputs and outputs, alongside a 2D plot with a blue circular shape and a "TorqMeter" gauge indicating a value of approximately 20.
Systems simulation

Simcenter Embed

A block diagram/state chart environment for embedded firmware development and hardware-in-the-loop (HIL) prototyping with automatic code generation.
Screen capture of a Simcenter System Architect dashboard.
Systems simulation

Simcenter System Architect software

Rapidly create heterogeneous system simulation architectures and seamlessly evaluate system level performance of your products through co-simulation.
Screen capture of the Simcenter Studio dashboard.
Systems simulation

Simcenter Studio software

A versatile tool leveraging patented technology for engineers and data scientists to create novel and topologically different system architectures.
Systems simulation

Simcenter PSIM

Simulation tool for power electronics and motor drives, handling power converter loss, motor drive efficiency, conducted EMI analysis, and code generation
Engineering data science and AI

Simcenter OmniV

MBSE software unifying product development with simulation, testing & requirements. Drag-drop modeling, FMEA tracking & vendor-agnostic integration.

探索物理測試產品

利用這些解決方案來取得和處理實體測試資料，加強測試流程並提高生產力和產品創新。

Simcenter

Simcenter Testlab software

Boost testing efficiency with integrated solutions for NVH, acoustics, durability, and more. Simcenter Testlab unites data acquisition, testing, and analytics tools.
Portable mobile units and autonomous smart recorders that are part of the Simcenter SCADAS hardware.
Simcenter

Simcenter SCADAS hardware

Gain productivity for multiphysics measurement with a broad range of test data acquisition hardware from portable units to high-channel-count laboratory systems.
Battery showing neutral and live wires connection.
Simcenter Testing

Simcenter Micred hardware

Enhance semiconductor package thermal quality with a test solution combining precise thermal characterization with high throughput automatic evaluation and binning.
Simcenter Testlab RT hardware device.
Simcenter

Simcenter Testlab RT system

Enables real time testing of physical virtual systems in lab or office environments, reducing reliance on costly physical prototypes.
Visual of the Simcenter Anovis System.
Simcenter

Simcenter Anovis system

Perform robust and reliable end-of-line testing during manufacturing. Simcenter Anovis combines all hardware, analysis and test bench control software.
A laptop running the Simcenter Testxpress Software
Simcenter

Simcenter Testxpress software

Make no compromise on sound and vibration testing efficiency. Combine the ease-of-use of a traditional analyzer and the performance of advanced measurement systems.
Mechanical equipment that uses the Simcenter Sound Camera.
Simcenter

Simcenter Sound Camera system

Quickly track down unwanted noise sources and accelerate acoustic troubleshooting to enhance product sound design.
The hardware part of the Simcenter Qsource.
Simcenter

Simcenter Qsources Hardware

Easily measure driving points and structural and vibro-acoustic frequency response functions with a suite of sound and vibration excitation hardware.

透過電磁模擬探索產品

Simcenter Feko

High-frequency electromagnetic simulation software for antenna design, EMC analysis and radar applications.
A picture of a 3d model of a spoke for simcenter flux software

Simcenter Flux

Low-frequency electromagnetic simulation software for accurate design of motors, sensors and power devices with multiphysics and coupled analysis capabilities.
3D electric motor model in simulation software with analysis options panel.

Simcenter Fluxmotor

Electric motor design software for rapid sizing and analysis of motor concepts with multiphysics considerations.
Heatmap of a cylinder using Simcenter MAGNET electromagnetic simulation.
Electromagnetic simulation

Simcenter MAGNET software

Perform low-frequency electromagnetic field simulations. Simcenter MAGNET helps you predict performance of any component with permanent magnets or coils.
Visual of a 3D model created with the Simcenter 3D software.

Simcenter 3D software

Address complex engineering challenges by enhancing simulation efficiency. Simcenter 3D is one of the most comprehensive, fully-integrated CAE solutions.

Simcenter E-Motor Director

System-level electric motor design and optimization software with automated workflows, multiphysics integration, and control system support.
A couple of engineers looking at the Simcenter E-Machine Design software on a screen.
Electromagnetic simulation

Simcenter E-Machine Design

Simcenter E-machine Design simulates a variety of motor types, including brushless PM motors, induction motors, switched reluctance motors and axial flux motors.

探索模擬建模和視覺化產品

A product screenshot of HyperMesh, showing finite element modeling of a car underbody.

Simcenter Hypermesh

Robust FEA pre‑ and post‑processor with AI‑augmented workflows, next‑gen design and optimization and an open, programmable interface.
A close-up of a blue car's front fender and hood, covered in a textured pattern of red and blue lines, with a turbulent, reddish-orange texture around the wheel well.

Simcenter Hypermesh CFD

Fast, high‑fidelity CFD with streamlined end‑to‑end workflows and AI‑accelerated simulation for aerodynamics, aeroacoustics and more.
Simulation modeling and visualization

Simcenter Hypermesh NVH

Rapidly identify and analyze design alternatives with a set of software automations to eliminate the root causes of squeak and rattle in assemblies.
Someone looking at HyperGraph, showing data plotting and visualization.

Simcenter Hypergraph

Revolutionize CAE data handling with advanced analysis, plotting and dashboards that interface with standard file formats for deep, insightful data exploration.
A person in a blue shirt works at a computer displaying a vibrant blue and green 3D model, while two colleagues collaborate in the background.

Simcenter Hyperview

A high‑fidelity CAE post‑processing environment delivering detailed, interactive data visualization and exploration of FEA and multibody simulation results.
Mechanical and manufacturing simulation

Simcenter Inspire

Inspire is a unified simulation-driven design platform for generating, optimizing and manufacturing innovative parts in one environment, enhanced with GPU rendering
a close-up of a complex mechanical part, likely a gearbox or engine component, rendered with a triangular mesh indicating a finite element analysis or CAD model.

Simcenter Simlab

A process-oriented multidisciplinary simulation environment that empowers users to accurately analyze the performance of complex assemblies.
Visual of a 3D model created with the Simcenter 3D software.
Mechanical and manufacturing simulation

Simcenter 3D software

Address complex engineering challenges by enhancing simulation efficiency. Simcenter 3D is one of the most comprehensive, fully-integrated CAE solutions.
Simulation made with the use of Simcenter Femap software.
Simcenter

Simcenter Femap software

Create, edit and evaluate finite element models of complex products/systems using advanced CAE pre- and postprocessors to model components, assemblies or systems.
Engineer uses Simcenter S-Frame for 3D structural analysis and design of a building model.
Structural analysis for AEC

Simcenter S-Frame

Use Simcenter S‑Frame to analyze and design structures of any complexity, material, load case, nonlinear behavior and code requirement

利用數位工程探索產品

Simulation process and data management visuals from the Teamcenter software.
Teamcenter

Teamcenter Simulation

Make better business decisions with Simulation Process and Data Management (SPDM) within Teamcenter PLM software.
Illustration of a man and a woman using laptops representing Simcenter X.
Digital engineering

Simcenter X

Accelerate innovation with Simcenter X - flexible, cloud-powered multi-domain simulation.
A laptop displays a software interface with "Altair One" at the top, showing various application tiles and a sidebar for filtering by role, application, publisher, and solution.

Altair One

Gain dynamic access to simulation, analytics, HPC & cloud resources in one place. Our unified licensing gives customers instant access to all software products.

探索工程資料科學和 AI 產品

A computer screen displays a CAD software interface showing a 3D model of a mechanical part and two color-coded contour plots illustrating predicted and true displacement analyses.
Engineering data science and AI

Simcenter PhysicsAI

Geometric deep learning delivering physics predictions 1000x faster than traditional solvers. Integrates machine learning for simulation across CAE workflows.
Showcasing the diverse array of portals and direct interfaces within HEEDS for process automation.
Simcenter

Simcenter HEEDS

Automates design exploration and optimization by connecting CAD and CAE tools to evaluate more concepts faster and at lower cost.
Simcenter Reduced order modeling (ROM) builder software visuals.
Simcenter

Simcenter Reduced Order Modeling software

Easily build, validate and export reduced order models using best-in-class methods to go faster with simulation or embed predictive power into products or processes.
Single Topic placeholder 640x480

Simcenter Executable Digital Twin Gateway

Virtual models predicting real behavior with active physical system interaction. Real-time simulation, AI integration & predictive maintenance capabilities.
Engineering data science and AI

Simcenter OmniV

MBSE software unifying product development with simulation, testing & requirements. Drag-drop modeling, FMEA tracking & vendor-agnostic integration.
Low-code engineering workflow automation platform with cross-application orchestration capabilities.

Simcenter Pulse Studio

Low-code platform for engineering workflow automation. Orchestrate cross-application solutions with script consolidation and parallel execution capabilities.

Simcenter RomAI

AI-powered reduced-order modeling for digital twins and system simulation - combining AI with dynamic system theory for superior accuracy and faster optimization.
Schematic created in MADe, which stands for Maintenance Aware Design environment
Engineering data science and AI

MADE

Maintenance Aware Design Ecosystem (MADE) identifies and mitigates technical risk, and optimizes design for complex engineering systems.
Siemens 標誌。

Simcenter Hyperstudy

A multidisciplinary design study solution that enables engineers to efficiently explore, understand and optimize design performance in an intuitive environment.

透過材料科學和管理探索產品

A digital graphic resembling a periodic table, with various colored squares and abstract elements, likely representing different materials or data categories in a structured format.

Simcenter Material Data Center

AI-powered material database for managing the lifecycle of proprietary material data, simulation-ready solver cards and driving enterprise material intelligence.

Simcenter Material Modeler

Comprehensive, intuitive framework for curve fitting and calibrating material models across multiphysics domains to generate simulation-ready material cards.
Structural simulation

Simcenter Multiscale Designer

Merges the modeling, simulation, uncertainty quantification, and optimization of composite material-based structures at multiple spatial and temporal scales

探索適用於 MBSE 的解決方案

使用基於模型的系統工程在產品開發過程中向左轉。利用模擬模型的洞察，為早期概念階段設計提供資訊，並利用領先業界的共同模擬來驗證系統層級效能與需求。

Screen capture of the Simcenter Studio dashboard.
Systems simulation

Simcenter Studio software

A versatile tool leveraging patented technology for engineers and data scientists to create novel and topologically different system architectures.
Screen capture of a Simcenter System Architect dashboard.
Systems simulation

Simcenter System Architect software

Rapidly create heterogeneous system simulation architectures and seamlessly evaluate system level performance of your products through co-simulation.
Schematic created in MADe, which stands for Maintenance Aware Design environment
Engineering data science and AI

MADE

Maintenance Aware Design Ecosystem (MADE) identifies and mitigates technical risk, and optimizes design for complex engineering systems.

探索探索和資料管理解決方案

基於業界領先的 PLM 解決方案，與模擬流程和資料管理 (SPDM) 保持整合。透過多學科設計分析與最佳化 (MDAO) 和模型順序減少 (MOR) 技術探索可能性。

Showcasing the diverse array of portals and direct interfaces within HEEDS for process automation.
Simcenter

Simcenter HEEDS

Automates design exploration and optimization by connecting CAD and CAE tools to evaluate more concepts faster and at lower cost.
Simcenter Reduced order modeling (ROM) builder software visuals.
Simcenter

Simcenter Reduced Order Modeling software

Easily build, validate and export reduced order models using best-in-class methods to go faster with simulation or embed predictive power into products or processes.
Simulation process and data management visuals from the Teamcenter software.
Teamcenter

Teamcenter Simulation

Make better business decisions with Simulation Process and Data Management (SPDM) within Teamcenter PLM software.

探索自主解決方案產品

Simcenter 提供預測自動駕駛汽車性能所需的工具。瀏覽「Simcenter」自動化工具系列。

Graphic of a car in traffic with sensors detecting the cars around it
Simcenter

Simcenter Prescan software

ADAS simulation with Simcenter Prescan enables the development and validation of ADAS and automated vehicle functionality.