Skip to main content
CASE STUDY

Cooling optimization in AI data centers

The global demand for computing power is growing. New, increasingly powerful data centers are constantly being built. The unprecedented growth of artificial intelligence means that these data centers must be more efficient and economical than ever before.

Using the contracted energy as well as other resources effectively has become a key challenge for data center operators, and component cooling is where the biggest gains can be made.

Modern systems use advanced liquid cooling technologies to manage energy efficiently, even in very busy data centers. One of the leading manufacturers of these solutions is the Polish company DCX Liquid Cooling Systems. It develops innovative liquid cooling systems based on the proven technologies from us and other manufacturers.

Systems for special tasks

When designing and building its solutions, DCX Liquid Cooling Systems relies on the proven and trusted technology suppliers. The company uses our controllers, HMI panels and power supplies, which play important roles in the installations it builds.

DCX Liquid Cooling Systems' main customers are AI data processing centers, as well as the HPC, Hyperscale, Enterprise and Neocloud data centers. The company designs and manufactures Coolant Distribution Units (CDUs), complete direct cooling systems, immersion cooling and modular data centers.

The company also handles the deployment and installation of the cooling infrastructure. DCX Liquid Cooling Systems' direct cooling solutions have been installed by the data center operators in countries like Sweden, France, the United States, Turkey and Switzerland.

DCX Liquid Cooling Systems

DCX Liquid Cooling Systems manufactures innovative liquid cooling systems based on proven technologies from Siemens and other companies.

The power distribution in an AI data center

In a data center, electricity flows from the power grid connection through the medium- and low-voltage switchgear, transformers, UPS modules and energy storage facilities, and then through the PDUs (Power Distribution Units) or busbars to the server racks. From there, it goes through the power supply units and VRM (Voltage Regulator Module) circuits to the CPUs, GPUs and TPUs that drive the data centers' computing power.

At the same time, most of the power used by the IT equipment is converted into heat.

“In the DCX system, specialized cold plates remove more than 80% of the heat from the server’s components. The heat flows through the Technology Cooling System loop to the FDU (Facility Coolant Distribution Unit) solutions. There it is transferred through a heat exchanger to a second loop, FWS (Facility Water System), which is isolated from the server room. FWS is responsible for further removing heat from the facility” – explains Maciej Szadkowski, Chief Technology Officer at DCX Liquid Cooling Systems. “This heat can then either be removed from by the dry coolers or used in a heat recovery system. We use also RDHX solutions, like rear door heat exchangers mounted at the back of the rack, because the remaining server components may still require limited air cooling. These cool air leaves the server and therefore limits its impact on the thermal conditions in the server room” – he adds.

As a result, it is possible to significantly reduce energy consumption. In a traditional data center, the cooling system can account for up to 40% of the total energy consumption.

“Of course, switching to the liquid cooling does not automatically mean 40% energy savings. Actual savings depend on several factors, including ambient temperature, cooling loop parameters and the amount of heat removed by liquid. The architecture used to recover the residual heat from the server room also plays a major role. Importantly, this heat can be used, among other things, to heat the swimming pools, greenhouses, and other facilities” – explains Tomasz Buk, Chief Executive Officer at DCX Liquid Cooling Systems.

DCX Liquid Cooling Systems

DCX’s competitive advantage lies in its expertise and unconventional approach to technology development.

Innovative technology

DCX Liquid Cooling Systems is replacing traditional air cooling and distributed CDUs with direct cooling installations, immersion cooling and centralized coolant control and distribution systems.

“For AI data centers, we offer a simplified, centralized cooling topology based on our flagship product, the FDU. Of course, we are talking here about the most demanding data centers here. These are the ones tasked with training or serving the AI solutions” – explains Maciej Szadkowski.

DCX's advantage lies in its expertise and unconventional approach to technology development.

“We were the first company in our industry worldwide to implement a Hyperscale CDU system capable of removing from 5 to as much as 8 MW of heat with a single unit” – notes Tomasz Buk.

The most important advantages of DCX's centralized cooling units include fewer pumps, heat exchangers, panels and service points. This translates to reclaimed floor space for the IT equipment and easier centralized diagnostics. Installation designs become more repeatable, and the loops can be run over distances exceeding 50 meters. This also improves design flexibility and the reliability of the entire system. Racks are positioned according to available power and structural load capacity rather than the distance from the CDU. This makes it easier to implement the N+1 and 2N architectures, which provide additional redundancy and ensure operational continuity in the event of a failure or maintenance work needs.

DCX Liquid Cooling Systems

DCX was the first company in the industry to implement a hyperscale-class CDU system that can remove 5 to 8 MW of heat with a single unit. Pictured from left: T. Buk and W. Kuś.

The role of control and automation

DCX solutions’ control architecture is based on a 12-inch HMI touch panel that is integrated with twin units in the building and with the building management system (BMS). The system includes temperature, flow, pressure, and differential pressure sensors, as well as leak, liquid level and water quality sensors.

We supply the essential components required to manufacture DCX Liquid Cooling Systems' cooling solutions, including SIMATIC HMI MTP1000 panels and SIMATIC S7-1500 controllers with a redundant processor.

“Siemens is a well-known supplier of automation and process control solutions. The reliability of this manufacturer's equipment and our very good relationship with the company were the key factors in our decision to choose Siemens as the supplier of essential components for our systems” – explains Tomasz Buk, CEO of DCX Liquid Cooling Systems.

Key elements of the cooling system include redundant SIMATIC controllers with dual-path logic, intelligent VFD pump drives as well as a liquid treatment system. The local HMI panel and the interface to the building management system also play an important role. The SIMATIC controllers are responsible for controlling the water flow, temperature and pressure, pump sequencing and maintaining safe operating conditions. In the DCX Liquid Cooling Systems' flagship solutions, such as the FDU 8 MW AT2, both controllers and the power supply systems are redundant.

The SIMATIC HMI panels serve as the human-machine interface. The DCX Liquid Cooling Systems team built the entire interface, including the visual layer, from scratch. With the Siemens HMI panels, operators can monitor FDU’s operating parameters, the status of the individual components and system alarms.

“Siemens provides the key components needed to build the FDU systems developed by DCX Liquid Cooling Systems, such as the controllers and the HMI panels. Using our components in such an innovative way is one of the elements of the company's competitive advantage. The redundant controllers minimize the risk of a control system fault and increase its reliability. If an anomaly is detected in one process controller, the backup controller takes over its function in less than 100 ms. The entire technological process remains uninterrupted throughout” – emphasizes Wojciech Kuś, Technical and Application Support Expert at Siemens Poland.

DCX Liquid Cooling Systems

Redundant controllers reduce the risk of control system failure and increase reliability.

DCX Liquid Cooling Systems

In flagship solutions, the power supply system is also redundant.

“DCX Liquid Cooling Systems' cooling solutions offers one of the most user-friendly interfaces in the industry. It is based on our HMI panels. As a result, elements such as equipment monitoring, process control or reading parameters and alarms enhance the positive user experience for those who use these solutions” – adds Wojciech Kuś.

“Our philosophy is to use the highest quality components from trusted European suppliers. The equipment we are developing demonstrates the capabilities of European engineering and is based on knowledge and quality originating from this continent. Our values and the supply chain matter enormously to us in the process of developing our solutions. That is precisely why we choose to work with such companies like Siemens to provide customers with high quality, predictable solutions in the shortest possible time” – explains Maciej Szadkowski, CTO of DCX Liquid Cooling Systems.

DCX Liquid Cooling Systems

SIMATIC HMI panels serve as the human-machine interface.

The stages of implementing a cooling system project

DCX Liquid Cooling Systems tailors its cooling systems to the needs of a specific data center. At the start of the project, requirements are gathered regarding IT power, the number and type of racks, temperature, the level of redundancy and the heat recovery potential. Then, the thermal and hydraulic design of the FWS/TCS systems is developed, and the FDU units, control automation solutions and other components are selected and configured. In parallel, the functional design of the control system, HMI interfaces and the integration with the BMS/DCIM systems is developed.

The next step is the mechanical and electrical prefabrication of the equipment, as well as the programming of the PLC controllers and HMI panels. Before shipping, the company conducts tests on the hydraulics and electrical systems, as well as functional tests, alarms and failover scenarios. Adequately connecting the installation at the site and integrating it with the existing FWS and TCS systems, power supply, and the higher-level systems plays a key role.

The final stages include testing and commissioning the system while gradually increasing the load. After personnel training and handover of the documentation, the solution is put into operation.

“As long as the market continues to grow, rack heat densities will also rise, as will the need for greater cooling capacity. Data centers will continue to grow. Currently, the demand for computing power exceeds the available space to process it, driving up the demand for cooling” – concludes Tomasz Buk, CEO of DCX.

DCX Liquid Cooling Systems

DCX Liquid Cooling Systems manufactures cooling systems tailored to the specific needs of data centers.