Find EMC and type test centers

Testing and certification you can trust

EMC testing is essential for products that generate electromagnetic energy. Siemens’ EMC test centers can perform:

• Electromagnetic and radiated emissions testing
• Environmental testing for climatic stress, including heat, cold, humidity and marine
• Environmental testing for mechanical stress, like vibration, shock, noise and pack drop
• Measurement of magnetic and electric fields
• Testing and certification for CE and UL standards

EMC-Seminars; Seminar registration

EMC-Center Erlangen: Laboratory

Address:

Günther Scharowsky-Str. 21

91058 Erlangen

About us: We are a DAkkS accredited testing laboratory according to DIN EN ISO/IEC 17025.

Our services:

• EMC measurements and tests:
  • IEC and EN standards for CE marking
  • FCC for approval in the United States
  • KS C standards for approval in Korea
  • Marine approval
    
    
• On-site EMC measurements and tests as well as troubleshooting for customer systems
• Measurement and tests at the laboratory or on-site according to MIL-STD and VG
• Radio measurements on products with already approved radio module (combined equipment) for RED

Article 3.2

• Support for measurement and test planning up to preparation of a test plan
• Consulting on EMC problems
• Support in improving the EMC of products and systems, also during development phase
• EMC seminars

Type Test Center Karlsruhe

Address:

Östliche Rheinbrückenstr. 50

76187 Karlsruhe

About us: We are a DAkkS accredited testing laboratory according to DIN EN ISO/IEC 17025. We have the following certifications: UL, FM, IEC/CB scheme, ATEX, IECEx, UKEX, CCC-Ex, marine.

Our services:

• Tests for CE marking of industrial electronics in accordance with the EMC and Low Voltage Directives
• Qualification of products for harsh environmental conditions
• Type test, certification, tests during development

Safety of electrical equipment and certification:

• Tests in accordance with IEC/EN standards for CE marking in accordance with the Low Voltage Directive and as an SMT laboratory in the CB scheme (via UL/DEMKO)
• Tests according to UL standards for UL certifications for USA and Canada
• Ex Zone II certifications: UL-HazLoc, FM, IECEx, ATEX, UKEX, CCC-Ex certification (UL, DEKRA, FM)
• Scope: IT devices (UL/IEC/EN 62368-1), electrical measurement, control and laboratory devices (UL/IEC/EN 61010)

Electromagnetic compatibility (EMC):

• EMC measurements and tests at the laboratory:
  • IEC and EN standards for CE marking
  • Marine approval
• Semi-anechoic chamber: 3 m measurement and test distance
  • Radiated emission measurement in frequency range 150 kHz bis 6 GHz
  • Radiated immunity in frequency range 80 MHz bis 6 GHz (20 V/m up to 1 GHz, 10 V/m up to 6 GHz)
• 2 shielded cabins: for immunity tests
  • IEC/EN 61000-4-2
  • IEC/EN 61000-4-4
  • IEC/EN 61000-4-5
  • IEC/EN 61000-4-6
• Test site mains simulations and grid perturbations: single phase
  • Flicker
  • Harmonics
  • Power supply interruptions and variations
  • Inrush current

Environmental testing (mechanical stress):

• Tests according to IEC/EN standards: vibration, shock, noise, pack drop test
• Operational and transport tests, tests for marine approval
• 2 vibration test systems with max. 35 kN, acceleration max. 100 g
• Precision drop machine for drop tests of hand-held and packaged devices

Environmental testing (climatic stress):

• Tests according to IEC/EN standards: heat, cold, humidity
• Operational and storage tests, tests for marine approval
• Environmental testing chambers from 600 liters to 1500 liters, temperature -70°C to +180°C, relative humidity 10% to 98%