SGT5-2000E heavy-duty gas turbine (50 Hz)
Proven E-class turbine with outstanding fuel flexibility
Simple cycle power generation (ISO) 0 MW(e)
Combined cycle efficiency: 53.3%
Fuel flexible gas turbine, suitable for burning crude oil and fuels with high viscosity
Reliable, robust, and flexible power generation
The SGT5-2000E gas turbine is a proven, robust engine for the 50 Hz market, used in simple cycle or combined cycle processes, with or without combined heat and power. It is suitable for all load ranges, including peak load, and offers outstanding fuel flexibility: You can use low-calorific gases, gases containing CO₂, H₂S and N₂ or crude oil and other liquid fuels with high viscosity. In addition, it provides low NOₓ emissions, even in the part load range.
Highlights of the SGT5-2000E gas turbine
The extensive fleet operating experience of the SGT5-2000E lets you benefit from best-in-class fleet reliability of > 99%. Its robust turbine design is continuously enhanced by high-performance upgrades.
Thanks to its fast start-up capability, you can achieve full load in only about 12 min. With its fast load change capability, in turn, you will meet the most stringent grid requirements for optimal frequency stabilization.
The SGT5-2000E offers dual-fuel capability and excellent fuel flexibility: It can be fired with low calorific gases or gases containing CO₂, H₂S and N₂, as well as with crude oil and other liquid fuels with high viscosity.
It provides reliable start-up and changeover between fuels. The automatic changeover from the primary to the secondary fuel can be carried out at reduced base load.
This robust engine is suitable for a wide range of ambient conditions such as cold climates, hot and dry or dusty environments. For hot and dry conditions, we offer these options to increase your power output:
- An evaporative cooler or an inlet air chiller with heat exchangers to avoid performance degradation
- A Wet Compression (WetC) system to enhance turbine performance by reducing compressor inlet temperatures and increasing the mass flow throughout the turbine
The SGT5-2000E is designed for easy maintenance to reduce outage times:
- Rotor de-stacking/re-stacking on site
- Blades can be individually replaced without rotor lifting
- Vane carriers can be removed without rotor lifting
- Minor inspections can be done through the spacious combustion chambers
Ingenious design to the core
The SGT5-2000E core engine has a horizontally split casing and two walk-in combustion chambers, equipped with individually replaceable ceramic tiles. This design allows a hot-gas-path inspection without cover lift. The 16-stage axial-flow compressor with variable-pitch inlet guide vanes enhances peak load operation and supports frequency stabilization.
The robust 4-stage turbine incorporates the latest blade and vane design for stable, improved performance. The hybrid burners are able to operate in premix and diffusion mode with natural gas, fuel oil and special fuels such as heavy oil and refinery residues. With the Low-NOₓ combustion system, single-digit NOₓ emissions can be achieved.
Short installation times
The gas turbine package for the SGT5-2000E consists of the core turbine, the generator (SGen5-100A-2P) and auxiliary systems. We offer you a standardized basic design with options geared to your specific requirements. By using standard components and preassembly or prepackaging we achieve short installation times, with staggered delivery and early shipment of main components. We group subsystems and install them in separate auxiliary packages to minimize field assembly.
The SGT5-2000E fires up
We offer both simple cycle and combined cycle power plants with or without cogeneration.
SGT5-2000E-based combined cycle plants (SCC5-2000E) have a fast-start capability. You can achieve combined-cycle base load within less than 12 minutes for start-up until full load with a start-up gradient of 30 MW/min. High load gradients allow for fast load changes. With excellent peaking capability, and high part load efficiency complying with emission regulations down to lower part load, this is your profitable solution for competitive energy markets with fluctuating power demand.
Optimized for short outages to maximize availability
We offer Long Term Programs (LTP), overhaul services, field service, spare parts, reconditioning of components and modernization upgrades. Whether scheduled service or short-term support, our specialists are there for you, on-site all over the world.
The SGT5-2000E generator package is optimized for short outages. Multiple borescopic inspection ports allow inspection of compressor and turbine blades without lifting covers. The heat shields on the combustion chamber are individually replaceable. All stationary and moving blades and all stationary blade and vane carriers can be replaced individually with the rotor in place.
Fuel flexibility matters
The SGT5-2000E offers outstanding fuel flexibility: It burns natural gas, LNG, syngas, blast furnace gas, biogas, ethane, propane, condensate, distillate oil, heavy and crude oils, biodiesel, alcohols, naphtha or kerosene.
The gas turbine can also be fired with low-calorific gases or gases containing CO2, H2S and N2, as well as with crude oil and other liquid fuels with high viscosity.
The SGT5-2000E provides low NOₓ emissions, even in the partload range or using liquid fuels.
NOₓ emissions at 15% O₂ dry:
- Emissions on fuel gas at 15% O2, without water injection: NOX ≤ 25 ppmvd | CO ≤ 10 ppmvd
Technical data for the SGT5-2000E
Performance data for simple cycle power generation
|Fuel (examples)||Natural gas, LNG, sour gases, distillate oil, biodiesel, crude oil, heavy fuel oil (HFO), kerosene, jet fuel, condensate. Other fuels on request|
|Heat rate||9,863 kJ/kWh (9,349 Btu/kWh)|
|Turbine speed||3,000 rpm|
|Pressure ratio||12.8 : 1|
|Exhaust mass flow||558 kg/s (1,230 lb/s)|
|Exhaust temperature||536°C (997°F)|
|NOₓ emissions||≤ 25 ppmvd at 15% O2 on fuel gas (without water injection for NOₓ control), ≤ 42 ppmvd at 15% O2 on fuel oil (with water injection for NOₓ control)|
NOₓ emissions at 15% O₂ on fuel gas (with DLE) at ISO ambient conditions.
SCC5-2000E: Performance data for combined cycle power plant
All combined cycle performance is based on 2 pressure, no reheat.
The SGT5-2000E is suitable for the following applications and industries:
"We love her" – SGT5-2000E gas turbine
Downloads and support
Find out more about our gas turbine offerings
In our download section, you can find brochures, technical papers, and more. Or you can contact us directly for specific inquiries.
Articles and papers
For more information, please contact our Customer Support Center.
(Charges depending on provider)
(From the German fixed network € 0.14/min.
and from the German mobile phone networks
max. € 0.42/min.)
SGT5-2000E reference highlights
Today, around 300 turbines have been sold, and additionally more than 200 turbines are under license. Our installed fleet has accumulated over 17 million equivalent operating hours. The SGT5-2000E fleet's overall best-in-class reliability exceeds 99.5%.
Az Zour, Kuweit (2004, upgrade to CC 2010)
Customer: Ministry of Electricity & Water
Power output: 1,600 MW
Scope: 2 x SCC5-2000E 4x1 with 8 x SGT5-2000E gas turbines (predecessor named V94.2), 8 x SGen5-100A-2P generators (predecessor named TLRI), 2 x SST5-4000 steam turbines, 2 x SGen5-2000H generators, and SPPA-T3000 control system
Geregu II, Nigeria (2013)
Customer: Niger Delta Power Holding Company (NDPHC)
Power output: 434 MW
Scope: 3 x SSC5-2000E with 3 x SGT5-2000E gas turbines, 3 x SGen5-100A-2P generators, and SPPA-T3000 control system
Townsville, Australia (1999, upgrade to CC 2005)
Power output: 243 MW
Scope: 1 x SCC5-2000E 1x1 with 1 x SGT5-2000E gas turbine (predecessor named V94.2), 1 x SGen5-100A-2P generator (predecessor named TLRI), 1 x steam turbine, and SPPA-T3000 control system
Do you have a question regarding our products, solutions and services?
To contact us, simply fill out our inquiry form.