Highly efficient, flexible and reliable technology for steam generation
Benson technology is a proven process for large-scale steam generation in power plants. The heart of this process is the once-through principle. Combined with sliding pressure operation, this allows for highly efficient, flexible, and reliable power plant operation.
Our Benson technology and our associated Benson license will improve your specific steam generator and, consequently, benefit your power plant performance. Find out more below or contact us.
History of the Benson Licence
In 1925, Siemens acquired the right to use Benson's patent, and in 1926–27 the first large Benson boiler in Berlin-Gartenfeld was built. Siemens improved the technology and developed it as an internationally acknowledged standard for large steam generators. In 1933, Siemens decided that it would no longer manufacture steam generators in its facilities, but would instead award licenses based on its own patents and expertise. This story goes still further:
Experience and expertise
Since 1933 leading steam generator manufacturers have constructed Benson steam generators worldwide under Siemens Benson license. Today, our Benson technology is widely used in fired steam generators and heat recovery steam generators of highly efficient modern power plants.
- Benson heat-recovery steam generators in combined cycle power plants
- Fired Benson steam generators in steam power plants
- Research and development
Superior technology for the latest power plant applications
Today combined cycle gas power plants need to be more efficient and flexible than ever, because they have to both
- Cover peak loads and
- Serve as backup reserves for renewables
This is where Benson HRSGs make an important contribution. The unique once-through design enables fast flexible start up of a combined cycle, while maintaining high cycle efficiency. Benson HRSGs can be constructed either horizontally or vertically and will fit into any power plant architecture.
Benefits compared with drum-type steam generators
- Steam parameters can be increased because there is no pressure limitation
- Increased efficiency in part-load operation and at high ambient temperatures, thanks to reduced attemperator flows compared with a drum-type HRSG
- Increasing operational flexibility: no limit on gas turbine load transients during startup and load changes, and no limit on load transients for possible duct firing
The first combined cycle power plant with a Benson heat-recovery steam generator (HRSG) – the 390-MW Cottam CDC, located in Great Britain – was successfully commissioned in 1999. More than 100 Benson heat-recovery steam generators have been commissioned to date or are currently under construction.
Supercritical pressure for maximum efficiency
The overall efficiency of a steam power plant counts in every respect, whether it’s reducing emissions or increasing economic efficiency. The best way to boost efficiency is by selecting high steam parameters. The once-through principle permits steam generation even at supercritical pressure. To date Benson boilers have been built for pressures up to 310 bar.
Contribution to flexible power plant operation
The Benson steam generator is especially well suited to flexible sliding-pressure operation: A steam power plant with a Benson steam generator can sustain load transients of four to six percent per minute over a wide power output range. High plant efficiency is ensured even at part load.
Sophisticated construction – individually optimized
Benson steam generators can be precisely adapted to suit your firing conditions: Different furnace sizes and geometries can be used depending on the fuel used. An important factor here is that the functions on the water/steam side are not restricted. Benson steam generators have been constructed with the broadest possible range of firing systems, including fluidized bed combustion.
Lately, the Benson steam generator with vertical rifled tubes has been successfully established in the market. Based on the Benson Low Mass Flux Design, this type of steam generator combines outstanding operating characteristics with low investment costs and high levels of reliability.
More than 1,300 Benson fired steam generators have been commissioned to date.
Start with something good – and make it even better
Benson steam generators have outstanding operating characteristics and are extremely reliable – thanks to continuous research and development. And we are refining the technology even more: We’re working intensively to optimize the heat transfer, pressure drop, and flow stability of two phase flows in evaporator tubes. Siemens has its own Benson test rig for the trials. The results of the trials have led to the creation of the world’s largest database on heat transfer and pressure drop in evaporator tubes, and support the development and validation of the Siemens Benson design software.
Another key area of focus is the development of Benson-specific control concepts, which make a key contribution to ensuring the best possible operation of your particular system.
License and services by Siemens
A profound package
The Siemens Benson license is available for fired steam generators as well as for heat-recovery steam generators. It primarily addresses the thermodynamic and thermo-hydraulic design of the evaporator system in Benson steam generators.
Basically, the license comprises the following components:
- Use of Siemens patents for the construction of Benson steam generators
- Use of specifically developed and highly specialized Benson design software
- Training and consulting
- Transfer of the latest findings from research and development
In addition to providing the Benson license, we also advise utilities on questions related to the evaporator system of once-through steam generators.
Downloads and support
Your source of information
This is where you can find contact details and downloads to the services we offer.
A selection of our projects around the world
The future energy hub of South America
22 vertical dual-pressure Benson HRSGs
Adding more than one Gigawatt to the Bolivian national grid
Extra capacity helps Bolivia to protect energy sovereignty
Equipment of three combined cycle power plants
24 vertical triple-pressure Benson heat-recovery steam generators
Part of the megaproject designed to increase electricity generation in Egypt by 50 percent
Highly efficient and flexible combined cycle operation
Record-breaking Fortuna power plant at the Lausward site
One horizontal triple-pressure Benson HRSG
Optimized plant design for reduced start-up times
> 61% net efficiency at > 600 MWel. , district heating 300MWth. > 85% fuel efficiency
Eco-friendly combined cycle power plant for the USA
Second follow-up order from customer for a highly flexible system from Siemens
Two horizontal Benson HRSGs for the multi-shaft system guarantee a high level of flexibility in operation
Offsets fluctuations in feed-in from renewables
Asia's most efficient combined cycle power plant
Two horizontal Benson heat-recovery steam generators
Following units 1, 2 and 3, the fourth combined cycle power plant Dangjin 4 supplies more than 900 MW
Eco-friendly electricity to more than 900,000 people
Highly efficient coal fired power plant in West Virginia
Coal fired power plant with an installed capacity of 695 MW
The world’s first supercritical pulverized coal boiler with vertical water wall tubing
Application of the Benson low mass flux design patented by Siemens
Give your steam generator a boost
Benson technology will make the difference: and we’ll find the right solution for your needs.