Converse by PART Engineering

Converse by PART Engineering darbina ar Advanced Partner Alliance

Uzlabojiet simulāciju, uzlabojiet inženieriju un optimizējiet dizainu ar papildu 82 produktiem, kas jau ir daļa no jūsu piedāvājuma. Atklājiet trešo pušu risinājumus no viena vienota avota, kuru pazīstat un uzticaties, izmantojot Advanced Partner Alliance (APA).<br/>APA risinājumi tiek piegādāti, izmantojot Altair Units licencēšanas sistēmu, kas ļauj klientiem piekļūt vairākiem inženiertehniskajiem rīkiem, izmantojot kopīgu licenču kopumu. Tas samazina šķēršļus pieņemšanai un vienkāršo iepirkumu jūsu klientiem.

Atklājiet Advanced Partner Alliance

Kāpēc Multiscale Simulation Software for Plastics?

Converse is an easy-to-use software that bridges the gap between injection molding simulation and mechanical simulation. Converse has a variety of mapping capabilities including but not restricted to fiber orientation, weldlines, pressures, temperatures, thickness, and stresses. It exports the data in a ready-to-use FE input deck for the particularly supported solver and for the built-in material model of that solver.

Priekšrocības

Easy-to-use and See Through: Open data handling requires no user subroutine. The fast and stable simulation provides high scalability through multi-processor capability.
Consider Manufacturing Influences: The influence of gate positions onto the mechanical behavior of the part are considered.
Achieves Higher Accuracy: More accurate simulation of part stiffness and strength assessment compared to isotropic approaches (fiber reinforcement) are offered.

Piedāvātās iespējas

Mapping Between Different Mesh Topologies

Mapping of fiber orientations, weld lines, pressures, temperatures, residual stresses, shrinkage, warpage, and wall thicknesses for shell elements.

Thermal analysis simulation software interface

Multiscale Material Model

Features anisotropic elasto-plastic material model using built-in solver material cards from a material database.

Strength Assessment Interfaces

FEMFAT, nCode, Simcenter 3D, and S-Life Plastics interfaces are available.

Mechanical Simulation Solver Interfaces

Abaqus, Ansys, Simcenter 3D, LS-DYNA®, Marc, Nastran, Simcenter OptiStruct, PERMAS, and Simcenter Radioss interfaces are available.

Reālās pasaules lietojumprogrammas

Select...

Weld Lines in Plastics

Challenge: Detect weak areas due to weld lines Estimate the influence on the part strength
Solution: Converse mapping capabilities in order to assign weld line areas and flow angle to the mechanical model
Results: Optimized manufacturing process Knowledge of local varying component strength