DCX solutions’ control architecture is based on a 12-inch HMI touch panel that is integrated with twin units in the building and with the building management system (BMS). The system includes temperature, flow, pressure, and differential pressure sensors, as well as leak, liquid level and water quality sensors.
We supply the essential components required to manufacture DCX Liquid Cooling Systems' cooling solutions, including SIMATIC HMI MTP1000 panels and SIMATIC S7-1500 controllers with a redundant processor.
“Siemens is a well-known supplier of automation and process control solutions. The reliability of this manufacturer's equipment and our very good relationship with the company were the key factors in our decision to choose Siemens as the supplier of essential components for our systems” – explains Tomasz Buk, CEO of DCX Liquid Cooling Systems.
Key elements of the cooling system include redundant SIMATIC controllers with dual-path logic, intelligent VFD pump drives as well as a liquid treatment system. The local HMI panel and the interface to the building management system also play an important role. The SIMATIC controllers are responsible for controlling the water flow, temperature and pressure, pump sequencing and maintaining safe operating conditions. In the DCX Liquid Cooling Systems' flagship solutions, such as the FDU 8 MW AT2, both controllers and the power supply systems are redundant.
The SIMATIC HMI panels serve as the human-machine interface. The DCX Liquid Cooling Systems team built the entire interface, including the visual layer, from scratch. With the Siemens HMI panels, operators can monitor FDU’s operating parameters, the status of the individual components and system alarms.
“Siemens provides the key components needed to build the FDU systems developed by DCX Liquid Cooling Systems, such as the controllers and the HMI panels. Using our components in such an innovative way is one of the elements of the company's competitive advantage. The redundant controllers minimize the risk of a control system fault and increase its reliability. If an anomaly is detected in one process controller, the backup controller takes over its function in less than 100 ms. The entire technological process remains uninterrupted throughout” – emphasizes Wojciech Kuś, Technical and Application Support Expert at Siemens Poland.