Please use another Browser
It looks like you are using a browser that is not fully supported. Please note that there might be constraints on site display and usability. For the best experience we suggest that you download the newest version of a supported browser:Continue with the current browser
Simple cycle power generation (ISO) 0 MW(e)
Combined cycle efficiency: 59.7%
Robust gas turbine with extensive fleet experience
The robust SGT5-4000F gas turbine has been optimized for outstanding performance and excellent efficiency. Easy maintenance results in short outages, making sure your gas turbine achieves highest availability. Its internal cooling air passages support reliable long-term operation and a fast start-up capability. Hydraulic Clearance Optimization (HCO) reduces clearance losses to increase gas turbine efficiency and minimize degradation at start-up and shutdown.
The proven SGT5-4000F gas turbine is characterized by high performance, low power generation costs, long intervals between inspections, and a service-friendly design. Optimized flow and cooling add up to high gas turbine efficiency and very economical power generation in combined cycle applications.
The gas turbine boasts excellent fast cold start and hot restart capabilities thanks to the light and stiff rotor with internal cooling air passages, the advanced annular combustion system and the Hydraulic Clearance Optimization (HCO) active clearance control.
The SGT5-4000F achieves combined cycle base load within 30 min for hot start.
Extensive experience in commercial operation means that you can rely on proven and validated package and plant concepts that enable early power generation in simple cycle. Projects are implemented quickly. Since no external rotor air cooler is required, this simplifies the plant integration even further.
The engine's blade design is based on proven materials and tried and tested know-how, while incorporating the latest aerodynamic technologies. The first three turbine stages are thermal barrier-coated. Your benefit: long service life and low maintenance.
The SGT5-4000F offers dual fuel capability and tolerates fuels within a wide Wobbe range. You might need to adjust the burner configuration when the Wobbe index of the fuel gas varies by more than ±15%.
The SGT5-4000F combustion system is able to handle different fuel compositions, e.g., contents of hydrogen sulfide (H₂S) of up to 4,000 ppm. Its system can switch over quickly between fuel gas and fuel oil and vice versa.
Wet Compression (WetC) increases the power output by injecting water into the gas turbine inlet.
This optional SGT5-4000F feature can be used for peak-load machines to benefit from high electricity prices.
How does it work?
WetC enhances the turbine performance by reducing compressor inlet temperatures and increasing the mass flow throughout the turbine.
With its high steam raising capability, the SGT5-4000F is excellently suited for cogeneration or CHP applications, e.g, for
For combined cycle applications with CHP, you can use a condensing or backpressure steam turbine, with or without steam extraction.
The SGT5-4000F entered the market in 1996.
Today, more than 350 turbines are sold worldwide, and the installed fleet has an accumulated fleet experience of 13 million equivalent operating hours (EOHs). The fleet reliability exceeds 99%.
Characterized by its robust design, the SGT5-4000F boasts a proven 15-stage axial flow compressor, a durable annular combustion system, and a fully air-cooled 4-stage turbine. The moderate compressor pressure ratio provides a low impact on critical components.
The rotor is based on self-centering and -aligning discs with Hirth serration and central tie rod, providing you with the advantage of fast and easy on-site rotor destacking and balancing. Internal cooling air passages reduce the stress on critical components and ensure a long service life.
The gas turbine package for the SGT5-4000F consists of the core turbine, the generator (SGen5-2000H or SGen5-2000P) and auxiliary systems. We offer you a standardized basic design with options geared to your specific requirements. By using standard components and preassembly or prepackaging we achieve short installation times, with staggered delivery and early shipment of main components. We group subsystems and install them in separate auxiliary packages to minimize field assembly.
SGT5-4000F-based combined cycle plants have the capability for fast start-up. With these plants, you can achieve combined cycle base load within 30 min for hot start (start-up gradient: 30 MW/min).
High load gradients allow for fast load changes. With excellent peaking capability, and high part load efficiency complying with emission regulations down to lower part load, this is your profitable solution for competitive energy markets with fluctuating power demand.
We offer Long Term Programs (LTP), overhaul services, field service, spare parts, reconditioning of components and modernization upgrades. Whether scheduled service or short-term support, our specialists are there for you, on-site all over the world.
The rotor of the SGT5-4000F can be de-stacked on site. All compressor and turbine blades are replaceable without rotor de-stack or lift. Thanks to borescope ports, the compressor and turbine vanes can be visually inspected without lifting the cover, preventing unnecessary maintenance.
The advanced annular combustion chamber with individually replaceable heat shields allows for fast and easy walk-in maintenance.
Whatever your needs may be: The SGT5-4000F offers dual fuel capability and tolerates fuels within a wide Wobbe range, as well as many different fuel compositions, e.g., contents of hydrogen sulfide (H₂S) of up to 4,000 ppm.
This gas turbine features a LEaNOₓ (Low Emissions and Noise Oxydation) combustion system for low NOₓ and CO emissions, suitable for gaseous and liquid fuels. It offers emission compliance over a wide load range.
Emissions on fuel gas at 15% O₂, without water injection: NOₓ ≤ 25 ppmvd; CO ≤ 10 ppmvd
|Fuel (examples)||Natural gas, LNG, sour gases, distillate oil, biodiesel, kerosene, jet fuel, condensate. Other fuels on request|
|Heat rate||8,846 kJ/kWh (8,385 Btu/kWh)|
|Turbine speed||3,000 rpm|
|Pressure ratio||20.0 : 1|
|Exhaust mass flow||725 kg/s (1,598 lb/s)|
|Exhaust temperature||600° C (1,112° F)|
|NOₓ emissions on fuel gas||≤ 25 ppmvd (without water injection for Noₓ control)|
|Noₓ emissions on fuel oil||≤ 42 ppmvd (with water injection for Noₓ control)|
|Noₓ emissions on fuel oil||≤ 58 ppmvd (without water injection for NOₓ control)|
NOₓ emissions at 15% O₂ at ISO ambient conditions.
Downloads and support
In our download section, you can find brochures, technical papers, and more. Or you can contact us directly for specific inquiries.
Today, around 350 turbines have been sold. The installed fleet has accumulated an impressive fleet experience of over 13 million equivalent operating hours, and a fleet reliability of more than 99%.
Customer: Suez-Tractebel Operation and Maintenance Oman LLC
Power output: 745 MW
Scope: SCC5-4000F 2x1 with 2 x SGT5-4000F gas turbines, 1 x SST5-5000 steam turbine, 3 x SGen5-2000H generators, and SPPA-T3000 control system
Customer: Electricity Generating Authority of Thailand (EGAT)
Power output: 770 MW
Scope: SCC5-4000F 2x1 with 2 x SGT5-4000F gas turbines, 1 x SST5-5000 steam turbine, 3 x SGen5-1000A generators, and SPPA-T3000 control system
Customer: Energía Argentina S.A. (ENARSA)
Power output: 420 MW
Scope: SCC5-4000F 1x1 with 1 x SGT5-4000F gas turbine, 1 x SST-900 steam turbine, 1 x SGen5-1000A generator, 1 x SGen5-100A-2P generator, 1 x HRSG, and SPPA-T3000 control system
Do you have a question regarding our products, solutions and services?
To contact us, simply fill out our inquiry form.