Please use another Browser
It looks like you are using a browser that is not fully supported. Please note that there might be constraints on site display and usability. For the best experience we suggest that you download the newest version of a supported browser:Continue with the current browser
The Dresser-Rand KG2 gas turbines are an industrial gas turbine with a power output range of 2MW. The turbines combine minimal maintenance in a compact footprint that make them ideal for continuous power generation onshore and offshore, emergency and standby power and combined heat and power (CHP) plants. Because of their simple, low maintenance design, high reliability and operational experience, the Dresser-Rand KG2 turbine generator packages are the preferred solution for 2MW power requirements. The wide fuel range enables operation on extremely low heating value fuels, landfill gas, and associated gas from crude oil production. The Dresser-Rand KG2 gas turbines are also available in an externally fired configuration for those customers with off-combustor technologies.
For industrial power generation, the KG2 gas turbine is suitable for the following applications:
The KG2 3G is available with a Dry Low Emissions (DLE) combustion system, providing extremely low NOx emission levels.
If ultra-low emissions are required due to strict environmental regulations, then the KG2 with Power Oxidizer is the gas turbine of choice.
If you have a low calorific gas that cannot be used in a standard gas turbine or reciprocating engine, or have a difficult waste gas stream, then the KG2 with Power Oxidizer is the best available option. This system can operate on virtually any waste gas stream eliminating the need for blending, the use of flares or other thermal oxidizer technologies, making power and heat energy with ultra-low emissions.
KG2 w/Power Oxidizer
KG2 Externally Fired
|Fuel||Natural gas||Gas, liquid and dual fuels||Virtually any waste gas stream||External heat source|
|Frequency||50/60 Hz||50/60 Hz||50/60 Hz||50/60 Hz|
|Output shaft speed||1,500 / 1,800 rpm||1,500 / 1,800 rpm||1,500 / 1,800 rpm||1,500 / 1,800 rpm|
|Exhaust mass flow||9.5 kg/s||15 kg/s||9.5 kg/s||9.35 kg/s|
|NOx emissions||≤ 24 vppm at 15% O2 (with DLE)||Fuel dependent||< 1 vppm at 15% O2|