Converse by PART Engineering

Converse by PART Engineering toiteallikaks on Advanced Partner Alliance

Täiustage simulatsiooni, täiustage inseneriteadust ja optimeerige disaini täiendava 82+ tootega, mis on juba osa teie pakkumisest. Avastage kolmandate osapoolte lahendused ühest ühtsest allikast, mida tunnete ja usaldate Advanced Partner Alliance (APA) kaudu.<br/>APA lahendused tarnitakse läbi Altair Unitsi litsentsimissüsteemi, mis võimaldab klientidel juurdepääsu mitmele insenerivahendile, kasutades jagatud litsentside kogumit. See vähendab kasutuselevõtu takistusi ja lihtsustab teie klientide hankeid.

Avasta Advanced Partner Alliance

Miks Multiscale Simulation Software for Plastics?

Converse is an easy-to-use software that bridges the gap between injection molding simulation and mechanical simulation. Converse has a variety of mapping capabilities including but not restricted to fiber orientation, weldlines, pressures, temperatures, thickness, and stresses. It exports the data in a ready-to-use FE input deck for the particularly supported solver and for the built-in material model of that solver.

Eelised

Easy-to-use and See Through: Open data handling requires no user subroutine. The fast and stable simulation provides high scalability through multi-processor capability.
Consider Manufacturing Influences: The influence of gate positions onto the mechanical behavior of the part are considered.
Achieves Higher Accuracy: More accurate simulation of part stiffness and strength assessment compared to isotropic approaches (fiber reinforcement) are offered.

Soovitatavad Võimalused

Mapping Between Different Mesh Topologies

Mapping of fiber orientations, weld lines, pressures, temperatures, residual stresses, shrinkage, warpage, and wall thicknesses for shell elements.

Thermal analysis simulation software interface

Multiscale Material Model

Features anisotropic elasto-plastic material model using built-in solver material cards from a material database.

Strength Assessment Interfaces

FEMFAT, nCode, Simcenter 3D, and S-Life Plastics interfaces are available.

Mechanical Simulation Solver Interfaces

Abaqus, Ansys, Simcenter 3D, LS-DYNA®, Marc, Nastran, Simcenter OptiStruct, PERMAS, and Simcenter Radioss interfaces are available.

Reaalse Maailma Rakendused

Select...

Weld Lines in Plastics

Challenge: Detect weak areas due to weld lines Estimate the influence on the part strength
Solution: Converse mapping capabilities in order to assign weld line areas and flow angle to the mechanical model
Results: Optimized manufacturing process Knowledge of local varying component strength